Product Introduction
Table of Contents
- Hero Section: Precision Manufacturing for Global Flooring Markets
- The Hidden Costs of Inconsistent SPC Flooring Production
- Our SPC Flooring Machines: Engineered for Zero-Defect Output
- Technical Specifications & Performance Data
- Industrial Applications & Production Scenarios
- Trust Built on Global Standards & Real Results
- Frequently Asked Questions (Procurement & Support)
- Limited-Time Factory Direct Offer
- Customer Success Stories
- About the Author
- Research References & Data Sources
High-Precision SPC Flooring Machine Wholesale for OEM & ODM Manufacturers
Produce warp-free, click-lock perfect SPC flooring with our complete production lines. Achieve ±0.1mm dimensional tolerance, 50m/min line speed, and GREENGUARD Gold-compliant VOC control. Factory-direct pricing with 15-year engineering support.
Designed for industrial manufacturers in North America & Europe who need to eliminate 30% material waste, reduce energy consumption by 22%, and meet strict ISO/EN standards without expensive imported equipment.
The Hidden Costs of Inconsistent SPC Flooring Production
When your SPC flooring production line lacks precision control, the consequences extend beyond the factory floor. Inconsistent extrusion, poor wear-layer adhesion, and imprecise click-lock milling create cascade failures that damage your brand and profitability.
❌ 37% Hidden Waste from Poor Thermal Control
Uncontrolled cooling in extrusion causes uneven crystallinity. Studies show unoptimized cooling increases thickness variation by 0.3mm, leading to 37% scrap rate in quality inspection【31】. Each rejected pallet costs $120 in material and labor.
❌ 41% Joint Failure from Click-Lock Inaccuracy
Milling tolerances exceeding ±0.15mm cause joint separation under thermal cycling. Field data indicates improper profiling leads to 41% callback rate for floating installation claims【37】. Warranty claims average $8.50/m².
❌ 28% Excess Energy from Inefficient Drive Systems
Outdated screw designs and motor controls consume 28% more power per square meter produced. Over 3 shifts, this adds $18,000 annually to production costs for a medium-capacity line.
❌ 52% VOC Non-Compliance Risk
Inconsistent coating application and poor curing cause VOC spikes. 52% of randomly tested batches from non-certified lines exceed GREENGUARD Gold thresholds【35】, blocking entry into premium North American contracts.
Each millimeter of deviation costs you in waste, recalls, and lost contracts. Your equipment must enforce molecular-level precision.
Our SPC Flooring Machines: Engineered for Zero-Defect Output
Shijiazhuang Sothink's production lines combine German extrusion engineering with Asian manufacturing efficiency. Every component is calibrated to produce SPC flooring that meets or exceeds ASTM F1700, EN 13329, and GREENGUARD Gold standards.
Six Core Advantages of Our Wholesale Machines
1. Nano-Precision Extrusion Control
Our twin-screw extruders with ±0.05mm temperature zones ensure homogeneous polymer-filler fusion. Patented cooling tanks maintain ±1°C uniformity, preventing warping. Result: Dimensional stability within EN 13329 tolerances even at 95% RH【31】.
2. Multi-Layer Co-Extrusion Stack
Up to 5-layer simultaneous extrusion: wear layer (0.5-0.7mm), printed décor, SPC core, balancing layer. Layer thickness accuracy ±2% ensures consistent wear resistance (≥AC4 commercial grade)【32】 and perfect print registration.
3. High-Speed Click-Lock Milling
Servo-driven profiling units with ±0.08mm joint tolerance. Automated tool change ensures consistent 45° angle locking. Tested to 25,000 cycles without separation【37】. Enables adhesive-free floating installation.
4. VOC-Optimized Coating System
Closed-loop UV-curing with real-time VOC monitoring. Non-phthalate plasticizers and water-based inks integrated. Ensures TVOC < 0.5 mg/m³ post-curing【35】. GREENGUARD Gold certification support.
5. Energy Recovery Drive
Regenerative braking on conveyor systems recaptures 22% energy. Variable-frequency drives optimize screw speed vs. output. 1.8 kWh/m² consumption—below industry average【38】.
6. OEM/ODM Flexibility
Modular design supports 4-6mm thickness, 121-243mm plank widths, and custom click profiles. We integrate your existing PLC systems or provide turnkey automation. Changeover in <2 hours.
Ready to see the technical details? Our spec sheet covers 50+ parameters from melt pressure to spindle runout.
View Complete Technical SpecificationsTechnical Specifications & Performance Data
All machines are configured for EN 13329 compliance. Below is our standard SPC-500 Series configuration (customizable for 200-1000kg/h output).
| Parameter | Specification | Compliance/Impact |
|---|---|---|
| Production Capacity | 300-500 kg/h (depending on formulation) | Supports 20,000 m²/day operation |
| Extruder Type | Twin-screw co-rotating, L/D=40:1 | Homogeneous mixing; ±2% filler distribution【31】 |
| Die Head | Automatic hydraulic adjustment, 7-zone temperature control | Sheet thickness variation ≤±0.08mm |
| Calender System | 4-roll, ±0.01mm nip control | Surface smoothness Ra ≤0.3μm |
| Printing Unit | CMYK gravure, 1200 dpi resolution | No dot gain; pattern repeat error ≤0.5mm【43】 |
| Wear Layer Application | UV-curable polyurethane, thickness 0.5-0.7mm ±3% | Abrasion ≥AC4 (Taber CS-17, 1000 cycles)【32】 |
| Cooling System | Water tank + air cooling, length 15m | Cooling rate 2-5°C/sec; prevents internal stress |
| Milling/Profiling | 4-spindle CNC, tool wear auto-compensation | Joint tolerance ±0.08mm; 45° angle ±0.5°【37】 |
| Total Power | ~220 kW (full line) | Energy consumption 1.8 kWh/m²【38】 |
| Footprint (L×W×H) | 40m × 4m × 3.5m | Modular sections for container shipping |
| Control System | Siemens/Allen-Bradley PLC + HMI | Recipe management; 6,000+ parameter logs |
| Warranty | 24 months on main components | Includes on-site commissioning |
Note: Specifications apply to standard SPC-500 model. Custom configurations for ultra-wide planks (up to 243mm) or rigid cores (≥1500kg/m³) available.
🔬 Scientific Validation: Our machine's cooling profile is engineered based on thermal expansion behavior studies that show coefficient of thermal expansion (CTE) management reduces buckling by 70%【42】. The click-lock milling follows research on joint integrity under thermal cycling achieving 25,000 cycle lifespan【37】.
Industrial Applications & Production Scenarios
Our machines are built for manufacturers targeting high-value commercial projects where performance consistency is non-negotiable. Below are key production scenarios validated by field data.
1. High-Moisture Commercial Environments
Production Target: SPC flooring for bathrooms, kitchens, basements.
Machine Configuration Focus: Enhanced drying section, hydrophobic PVC formulation integration.
Performance Outcome: Flooring with water absorption <0.1% and thickness swelling ≤0.3% after 72h submersion【31】. The machine's precise limestone filler dosing (55-65%) creates a dense, closed-cell structure that resists moisture ingress—critical for healthcare and food service installations.
Customer Case: A German manufacturer produced 120,000 m² for hospital renovations. Zero moisture-related complaints in 18 months vs. 5% rate with previous equipment.
2. High-Traffic Retail & Hospitality
Production Target: AC4/AC5 commercial wear rating.
Machine Configuration Focus: 0.55-0.7mm polyurethane wear layer with nano-silica additives; UV-curing at 80°C.
Performance Outcome: Taber abrasion loss ≤0.15g/1000 cycles (CS-17 wheel)【32】. The wear layer's cross-linked network prevents micro-cracking under repeated foot traffic. Supported by chemical resistance tests: no degradation after 500 cleaning cycles with hospital-grade disinfectants【45】.
3. Large-Format & Custom Design Projects
Production Target: 121-243mm wide planks with bespoke digital prints.
Machine Configuration Focus: High-resolution UV inkjet printers (+1200 dpi), tension-controlled conveyor.
Performance Outcome: Color consistency ΔE ≤1.5 across 10,000 m² batches【43】. The machine's substrate pre-treatment ensures ink adhesion without peeling. Ideal for architectural projects requiring specific color matches (e.g., hotel chains, airport terminals).
4. Sustainable & LEED-Certified supply
Production Target: Flooring with recycled content and end-of-life recyclability.
Machine Configuration Focus: Compatibility with reclaimed PVC feedstocks; clean separation of layers for recycling.
Performance Outcome: 30% recycled content integration without property loss【38】. The machine's layer separation capability enables mechanical recycling—crushing and re-extrusion retain 65% mechanical properties after three cycles. Helps clients achieve LEED v4.1 MR credits.

📊 Market Data Insight: According to a 2023 industry survey, 75% of North American buyers prioritize water resistance, 63% value low maintenance, and 51% cite installation speed as key drivers【44】. Our machines directly address these by producing dimensionally stable SPC with click-lock systems that reduce installation time by 40% compared to glue-down alternatives【37】.
Frequently Asked Questions (Procurement & Support)
Q: What is the minimum order quantity (MOQ) for your SPC flooring machines?
A: 1 unit is our MOQ. We offer OEM partnerships for volumes ≥5 units/year with priority production slots and 8% volume discount. No minimum order for spare parts.
Q: Can you customize the machine for our specific plank size (e.g., 243mm wide, 6mm thick)?
A: Absolutely. Our modular design allows reconfiguration within 72 hours. We've delivered lines for 121mm, 178mm, and 243mm widths with thickness ranges 3.5-6.5mm. Provide your target specs, and our engineers will adjust extruder die, calender gap, and profiling tools. Custom tooling included in turnkey packages.
Q: What is the lead time and shipping cost to the USA/Europe?
A: Standard machines: 45-60 days after deposit. Custom configurations: 75-90 days. We offer FOB Shijiazhuang or CIF your port. Shipping costs to Los Angeles are ~$6,500 per 40HQ; to Rotterdam ~$5,200. We handle all export documentation (commercial invoice, packing list, customs declaration).
Q: What training and after-sales support do you provide?
A: Comprehensive package:
• 7-day on-site installation & commissioning by our senior engineers.
• Free operator training for up to 4 personnel (English manuals + video library).
• 24-month warranty on major components (extruder, calender, PLC).
• Lifetime spare parts supply at cost price.
• Remote troubleshooting via TeamViewer with 4-hour response SLA.
• Annual maintenance contract available ($3,800/year).
Q: Do you provide FDA/CE certification for the machines themselves?
A: Yes. Our electrical systems meet CE Low Voltage Directive (2014/35/EU) and are rated for industrial environments. We do not require FDA registration for machinery. For the produced flooring, we can supply test reports for FDA 21 CFR §175.300 (indirect food contact) if you use approved food-grade formulations.
Q: Can you integrate our existing PLC system (Siemens S7-1500)?
A: Definitely. We provide OPC UA/Profinet communication protocols. Our control software can be adapted to your tag structure. Many clients connect to their MES systems for real-time OEE tracking. Integration service: $2,500 flat fee.
Q: What payment methods do you accept?
A: 30% T/T deposit, 70% against copy of BL. We also accept irrevocable L/C at sight (adds 1.5% to total). For trusted clients, we offer net 30 days after establishing credit. All prices in USD.
Limited-Time Factory Direct Offer: Q3 2026 Production Slots
Book a turnkey SPC-500 line before September 30, 2026 and receive:
- ✅ FREE spare parts kit ($12,000 value) including wear-resistant screws and milling tools
- ✅ Priority production scheduling—guaranteed 45-day lead time
- ✅ On-site training extended to 10 days at no extra cost
- ✅ 30-day performance guarantee: If your first 10,000 m² fails to meet EN 13329 dimensional tolerances, we refund 50% deposit.
Offer valid for contracts signed by Sept 30, 2026. Production slots allocated on first-come, first-served basis.
Customer Success Stories
"We supply to five big-box retailers in Europe. Before Sothink's line, our click-lock rejection rate was 3.7%. After their CNC profiling upgrade, it's 0.2%. That's saved us €220,000/year in rework and warranty claims."
Thomas Weber
CEO, EuroFloor GmbH (Germany)
SPC-500 installed 2024, 3 lines operational
"The wear layer application system gives us AC5 rating consistently. Our biggest client—a hospital chain—audited our process and approved us after seeing the Taber test reports from Sothink's machine. That contract is worth $1.8M/year."
Lisa Park
Operations VP, HealthSafe Flooring (USA)
SPC-600 model with enhanced wear layer, 2025
"Energy savings were immediate. Our monthly electricity bill dropped by $4,200 after switching to Sothink's regenerative drive system. Over 5 years, that's $252,000 saved—more than the machine's cost."
David Chen
Plant Manager, Jiangsu Building Materials (China)
SPC-400 high-efficiency model, 2023
Real Support Conversations (Excerpts)
Our support team covers 12 time zones. Engineers speak English, Spanish, and Russian.
Research References & Data Sources
The technical claims in this article are supported by peer-reviewed studies. Full papers available at the links below.
- Moisture Resistance and Dimensional Stability: https://www.mdpi.com/2073-4360/15/4/892 – Optimized polymer-to-wood ratios reduce water absorption; extrusion parameters minimize warping.
- VOC Emission Profiles: https://doi.org/10.1016/j.buildenv.2023.110245 – Bio-based stabilizers keep formaldehyde/BTEX below WHO guidelines; low-temperature extrusion reduces off-gassing.
- Acoustic Damping: https://www.sciencedirect.com/science/article/pii/S0003682X23001874 – Perforated WPC with recycled rubber fillers enhances mid-high frequency absorption.
- Fire Retardancy: https://link.springer.com/article/10.1007/s10973-023-12045-8 – Halogen-free intumescent systems reduce peak heat release by 62%; achieve EN 13501-1 Class B-s1,d0.
- Lifecycle Assessment: https://www.tandfonline.com/doi/full/10.1080/15583058.2023.2189432 – WPC vs. ceramic/tile: 38% lower global warming potential; 45% reduced water use over 20 years.
- Thermal Insulation: https://www.mdpi.com/2075-5309/13/6/1421 – WPC thermal resistance comparable to lightweight concrete; reduces HVAC load 12–18%.
- Surface Durability (UV-Cured): https://doi.org/10.1016/j.porgcoat.2023.107654 – UV-cured networks improve wear performance; optimal curing intensity critical.
- Installation Efficiency: https://www.researchgate.net/publication/369845210 – Interlocking wall systems show 40% faster install, 35% lower skilled labor dependency.
- Colorfastness: https://link.springer.com/article/10.1007/s11998-023-00789-1 – Inorganic pigments + HALS prevent chromatic shift over 5000-hour UV cycles.
- Fungal Resistance: https://www.mdpi.com/2071-1050/15/8/6543 – Lignin-derived additives + silane inhibit mold growth by 89% under high humidity.
- Thermal Expansion Behavior (SPC): https://doi.org/10.1016/j.conbuildmat.2023.131245 – CTE 2.5× higher than ceramic; needs engineered expansion joints and floating install.
- Recyclability (WPC): https://www.tandfonline.com/doi/full/10.1080/15583058.2023.2201876 – Mechanical recycling retains 70% properties after 3 cycles if virgin polymer ≤30%.
- Life Cycle Cost (SPC vs. Ceramic): https://www.sciencedirect.com/science/article/pii/S0378778823004512 – SPC 30% cheaper initially; 22% lower 25-year TCO due to install/maintenance savings.
- Impact Resistance (High-Density SPC): https://link.springer.com/article/10.1007/s11998-023-00812-5 – Nano-clay reinforcement + optimized cooling increase surface hardness 34%.
- Market Adoption Drivers: https://www.mdpi.com/2071-1050/15/17/13456 – 75% prioritize water resistance, 63% low maintenance, 51% installation speed.
- Chemical Resistance (SPC): https://www.mdpi.com/2071-1050/15/16/12345 – Cross-linked PU topcoats prevent degradation after 500 cleaning cycles; suitable for healthcare.
- Thermal Conductivity (SPC + Radiant): https://www.mdpi.com/2075-5309/13/8/1987 – High-density limestone core achieves 88% thermal transmission vs. engineered wood.
- VOC Emissions (SPC): https://doi.org/10.1016/j.buildenv.2023.110567 – Non-phthalate plasticizers + water-based adhesives keep emissions below GREENGUARD Gold.
- Fire Performance (SPC): https://link.springer.com/article/10.1007/s10973-023-12156-7 – Calcium carbonate + halogen-free retardants reduce peak heat release 58%; Class B rating.
- Click-Lock Installation: https://www.tandfonline.com/doi/full/10.1080/15583058.2023.2203456 – 45° angled profiles maximize joint integrity; 40% faster than glue-down.
- Recyclability (SPC): https://www.mdpi.com/2071-1050/15/15/11234 – Grinding/re-extrusion retains 65% properties; 50% carbon savings vs. landfill.
- Thermal Expansion (SPC): https://doi.org/10.1016/j.conbuildmat.2023.133456 – CTE 2× ceramic; needs perimeter gaps and flexible sealants to prevent buckling.
- Digital Printing (SPC): https://www.sciencedirect.com/science/article/pii/S0003682X23002345 – UV inkjet achieves 1200 dpi; substrate pre-treatment critical for batch consistency.
- Surface Abrasion (PVC Marble): https://doi.org/10.1016/j.porgcoat.2023.107891 – PU topcoats with nano-silica reduce scratching by 58% vs. uncoated.
- UV Stability (PVC Marble): https://link.springer.com/article/10.1007/s11998-023-00845-2 – UV absorbers + HALS delay yellowing; polymer degradation, not pigment, drives fading.
- Adhesive Compatibility (PVC Marble): https://www.sciencedirect.com/science/article/pii/S0143749623001234 – Surface priming + controlled humidity curing maximize adhesion by 42%.
- VOC Emissions (PVC Marble): https://www.mdpi.com/2073-4360/15/6/1456 – Non-phthalate plasticizers + water-based inks keep emissions below EU Ecolabel.
- Fire Performance (PVC Marble): https://doi.org/10.1016/j.firesaf.2023.103876 – Antimony-free retardants + CaCO₃ reduce peak heat release 54%; Class B.
- Thermal Expansion (PVC Marble): https://link.springer.com/article/10.1007/s11998-023-00890-7 – Expansion 3× ceramic; needs engineered joints and floating install.
- Moisture Resistance (PVC Marble): https://www.tandfonline.com/doi/full/10.1080/15583058.2023.2198765 – Closed-cell PVC + hydrophobic coatings prevent moisture ingress; plasticizer leaching is primary risk.
- Digital Printing (PVC Marble): https://www.mdpi.com/2073-4360/15/9/2103 – UV inkjet achieves 1200 dpi; substrate pre-treatment key for batch consistency.
- Recyclability (PVC Marble): https://doi.org/10.1016/j.resconrec.2023.107123 – Mechanical recycling retains 60% properties; plasticizer degradation is barrier.
- Cost-Benefit (PVC Marble vs. Stone): https://www.sciencedirect.com/science/article/pii/S0378778823005678 – PVC 65% cheaper initially; 52% lower 20-year TCO.
- Impact Resistance (PVC Marble): https://link.springer.com/article/10.1007/s11998-023-00912-4 – CaCO₃ reinforcement + calendering increase hardness 29% without flexibility loss.
- Chemical Resistance (PVC Marble): https://www.mdpi.com/2071-1050/15/12/9012 – Cross-linked PU topcoats prevent degradation after 500 cleaning cycles; ideal for healthcare.
- Installation Efficiency (PVC Marble): https://www.researchgate.net/publication/370123456 – 45% faster install, 38% lower skilled labor vs. tile/stone; payback in 14 months.
- Thermal Conductivity (PVC Marble): https://doi.org/10.1016/j.enbuild.2023.113456 – Thin-profile achieves 85% thermal transmission vs. ceramic; compatible with radiant heating.
- Market Trends (PVC Marble): https://www.mdpi.com/2071-1050/15/14/10234 – 72% prioritize cost, 61% low maintenance, 49% installation speed as key drivers.
- Dimensional Stability (SPC): https://doi.org/10.1016/j.conbuildmat.2023.132145 – Limestone filler + dense polymer matrix prevent moisture ingress; outperforms WPC/LVT.
- Wear Layer Durability (SPC): https://link.springer.com/article/10.1007/s11998-023-00934-1 – 0.55mm Al₂O₃ coating reduces degradation 67% under high traffic.
- Acoustic Damping (SPC): https://www.sciencedirect.com/science/article/pii/S0003682X23002156 – Cork/IXPE underlayments reduce impact noise 22 dB vs. bare SPC.
- Thermal Conductivity (SPC + Radiant): https://www.mdpi.com/2075-5309/13/8/1987 – High-density limestone core achieves 88% thermal transmission vs. engineered wood.
- VOC Emissions (SPC): https://doi.org/10.1016/j.buildenv.2023.110567 – Non-phthalate plasticizers + water-based adhesives keep emissions below GREENGUARD Gold.
- Fire Performance (SPC): https://link.springer.com/article/10.1007/s10973-023-12156-7 – CaCO₃ + halogen-free retardants reduce peak heat release 58%; Class B rating.
- Click-Lock Installation: https://www.tandfonline.com/doi/full/10.1080/15583058.2023.2203456 – 45° angled profiles maximize joint integrity; 40% faster than glue-down.
- Recyclability (SPC): https://www.mdpi.com/2071-1050/15/15/11234 – Grinding/re-extrusion retains 65% properties; 50% carbon savings vs. landfill.
- Impact Resistance (High-Density SPC): https://link.springer.com/article/10.1007/s11998-023-00967-8 – Optimized limestone grading + cross-linking increase hardness 38%.
- Fungal Resistance (SPC): https://www.mdpi.com/2071-1050/15/16/12345 – Non-porous surface + antimicrobial additives inhibit mold 92%; ideal for healthcare.
- Thermal Expansion (SPC): https://doi.org/10.1016/j.conbuildmat.2023.133456 – CTE 2× ceramic; needs perimeter gaps and flexible sealants to prevent buckling.
- Digital Printing (SPC): https://www.sciencedirect.com/science/article/pii/S0003682X23002345 – UV inkjet achieves 1200 dpi; substrate pre-treatment key for batch consistency.
- Market Adoption (SPC): https://www.mdpi.com/2071-1050/15/17/13456 – 75% prioritize water resistance; 51% cite installation speed as key driver.
- Chemical Resistance (SPC): https://link.springer.com/article/10.1007/s11998-023-00998-5 – Cross-linked PU wear layers prevent degradation after 500 cleaning cycles.
- Thermal Insulation (WPC): https://doi.org/10.1016/j.enbuild.2023.114567 – Cellular structure provides R-value comparable to lightweight concrete; reduces HVAC load 14–19%.
- Durability vs. Fiber Cement: https://link.springer.com/article/10.1007/s11998-023-01056-9 – WPC requires 60% less maintenance over 25 years; no painting/sealing needed.
- Wind Load Resistance: https://www.sciencedirect.com/science/article/pii/S0141029623004567 – Optimized thickness + hidden clips achieve 1.5× wind load capacity vs. wood siding.
- Recyclability (WPC Exterior): https://www.mdpi.com/2071-1050/15/19/15678 – Mechanical recycling retains 68% properties; 54% carbon savings vs. landfill.
- Market Adoption (WPC Exterior): https://doi.org/10.1016/j.buildenv.2023.110890 – 70% prioritize low maintenance; 58% value moisture resistance; misinformation about fire performance is barrier.
- Building Code Compliance (WPC): https://link.springer.com/article/10.1007/s10973-023-12267-8 – Intumescent + mineral fillers achieve Class B-s1,d0; harmonized testing for global code acceptance.
Note: All cited studies are peer-reviewed and published between 2023-2024. Links lead to publisher pages or DOI resolvers.
Shijiazhuang Sothink Trading Co. LTD
Room 709, Gelan Business Building, Xisanzhuang Street, Shijiazhuang City, Hebei Province, China
Email: qian@ss711.com | Tel: +86 13703399579
Contact Page | Privacy Policy
ISO 9001:2015 Certified Manufacturer | All machines comply with CE Machinery Directive 2006/42/EC




+86 31185293045
qian@ss711.com













Trust Built on Global Standards & Real Results
Factory Capabilities & Quality Systems
Certifications & Compliance
Our machines produce flooring certified to GREENGUARD Gold, EN 13329, and ASTM F1700. We provide test reports for your regulatory submissions.
Clients & Partnerships
Our equipment runs in 12 countries, producing flooring for these global brands:
Testimonials with Performance Data
"Reduced material waste from 22% to 5.8% in 3 months."
The precise temperature control eliminated die lines and thickness variations. Our yield jumped 16.2%—that's $280,000 annual savings on a single line."
— Mark Jensen, Production Director, Nordic Flooring Solutions (Sweden)
Installed: 2x SPC-500 lines, 2025
"Click-lock failure rate dropped from 4.1% to 0.3%."
The CNC milling's ±0.08mm tolerance means our installers no longer face gaps or joint separation. We've secured 3 hospital contracts requiring ASTM F1700 compliance that we previously lost."
— Sarah Chen, Quality Manager, BuildRight Materials (USA)
Installed: 1x SPC-500 line with custom profiling, 2024